| List of our products |
|---|
| Code | Description | Price/ dlls. | Buy online |
|---|
| PICmicro® MCU studio - basic projects |
| 500 | - not available in english version - | | |
| 501 | PIC® microcontroller programmer | $30.50 | |
| 502 | PIC16F84 Trainer | $30.50 | |
| 503 | Control for stepper motors | $30.50 | |
| 503-1 | Cable for stepper motor | $7.50 | |
| 503-2 | Airpax.stepper motor Alim 5 a 36V 7.5° | $2.50 | |
| 505 | Manual programmer for the PIC16F84 | $58.00 | |
| 507 | Clone Stamp 1/4 | $22.80 | |
| 508 | Module with a Dip of 4 and 2 Relays | $30.50 | |
| 509 | PIC12C508 Trainer | $22.80 | |
| 510 | Extension for the Prog2 programmer | $13.50 | |
| 511 | PIC16F84 programmer with Display | $53.50 | |
| 512 | - not available - | | |
| 513 | PIC16F84 PIC16F628 programmer Kit | $10.50 | |
| 514 | Base ensamble Kit for 18 pin PIC® devices | $10.50 | |
| 515 | Four buttons keyboard | $10.50 | |
| 516 | Twelve buttons keyboard | $14.00 | |
| PICmicro® MCU studio - intermediate projects |
| 601 | One Rx input circuit | $30.50 | |
| 602 | RS232 Trainer | $30.50 | |
| 603 | RS485 Trainer | $30.50 | |
| 604 | Clone Stamp. 256 Instructions | $42.00 | |
| 605 | Stamp 1 original chip | $47.00 | |
| 606 | Chip Stamp I, cristal 4Mhz, cap 15pF and one R of 3,3K | $20.00 | |
| 607 | IR Proximity Sensor 1 CMOS/TTL output | $15.00 | |
| 608 | IR Proximity Sensor 1 rele output | $23.00 | |
| PICmicro® MCU studio - advanced projects |
| 701 | RS232 two digits display | $15.00 | |
| 702 | RS232 four digits display | $23.00 | |
| 703 | Module 5 inputs 3 outputs with relays | $30.50 | |
| 704 | Module 5 inputs 5 outputs with relays | $38.00 | |
| 705 | Module 5 inputs 8 outputs with relays | $57.00 | |
| 706 | Module 17 inputs 16 outputs with relays | $76.00 | |
| 707 | Module 8 outputs with relays | $30.50 | |
| 707-1 | Parallel cable for the 8or module | $7.50 | |
| 708 | EEPROM 93LC66 serial device programmer | $30.50 | |
| 709 | EEPROM 24 serial device programmer | $30.50 | |
| 711 | Electronic thermostat with PIC16F872 | $34.00 | |
| 712 | IR module with 8 outputs | $11.50 | |
| 712-1 | IR remote control (universal) | $7.50 | |
| 713 | Control for R/C servomotors | $30.50 | |
| 713-1 | Servo motor for the module (Svprog) | $17.00 | |
| 713-2 | Source program for the module (Svprog) | $11.50 | |
| 714 | Industrial timer with PIC16F84 | $46.00 | |
| 715 | LCD serial with PIC16F84 | $41.00 | |
| 716 | 'Electronivel Simplex' pump control module | $46.00 | |
| 717 | Infrared control module (8 relays) | $46.00 | |
| 718 | Eight rele multiplexer module | $50.00 | |
| Virtual instruments |
| 710 | Virtual Frequency Meter | $30.50 | |
| 750 | Data logger | $30.50 | |
| PC Interface studio |
| 801 | Programmable parallel interface | $30.50 | |
| 803 | RS232 Transmitter | $15.00 | |
| 809 | RS232 to RS485 Transmitter Half Duplex | $46.00 | |
| 810 | RS232 to RS485 Transmitter Full Duplex | $46.00 | |
| 811 | RS232 interface 8 I/O (5input/3output) | $67.00 | |
| 812 | RS232 port tester | $31.00 | |
| 813 | PS2 keyboard module (20 keys) | $41.00 | |
| Pwr studio |
| 504 | Regulate source/charger | $23.00 | |
| 902 | Dual variable power source 0 +/- 30V | $34.00 | |
| 903 | 5V power supply | $11.50 | |
| Audiorythm controls |
| 1001 | Programmer for COLOR MOON | $45.50 | |
| 1002 | Programmer for 8 DC motors, 8 channels | $91.50 | |
| 1003 | Programmer for eight DC motors, two channels | $38.00 | |
| 1004 | Audiorythm control for two DC motors | $15.00 | |
| 1005 | Audiorythm module to control up to 8 DC motors | $19.00 | |
| RF Studio |
| 851 | Remote control receiver with 5 output relays (80 meters) | $205.00 | |
| 852 | Remote control 5 keys (20 meters) | $61.50 | |
| 853 | Remote control 8 keys (30 meters) | $82.00 | |
| Robotic Studio |
|---|
| 1410 | Programmable in real time control module | $243.00 | |
| 1414 | Real Time PLC | $102.00 | |
| 1415 | Robotic arm with 2 CD motors | $71.00 | |
| Electronic Sensors |
|---|
| 2100 | Optointerruptor with a cable | $6.00 | |